Driver for AboCom Systems FSW410


Download Now
AboCom Systems FSW410 Driver

The LED will be off for a few seconds when the system is starting. The LED will then start to .. Abocom FSW User's Manual · D-Link DIR Installation. 1 - 30 AboCom drivers: AboCom WAP Access Point Firmware e WR Router Firmware ,AboCom FSW Router Firmware Compact Wireless Router User Manual details for FCC ID MQ4WR made by Abocom Systems Inc. Document Includes User Manual User g: FSW


AboCom Systems FSW410 XP

Type: Driver
Rating:
3.88
346 (3.88)
Downloads: 50
File Size: 2.93Mb
Supported systems: Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10
Price: Free* [*Free Registration Required]

Download Now
AboCom Systems FSW410 Driver

SPGK http: This fullfeature and self-contained compact Wireless Router will allow broadband access in both of LAN and Wireless environment. This device has been specifically designed to provide LAN and Wireless users the most AboCom Systems FSW410 method with multiple accesses to the Internet. The friendly WEB-based graphics interface makes setup easy for any inexperienced users.

Download AboCom drivers

This device is also an Access Point. It has a built-in wireless LAN.

  • AboCom Firmware device drivers from AboCom source -
  • Free Abocom Network Router User Manuals
  • MicroNet Technology SPGK User's Manual
  • Abocom Network Router Manuals
  • Ask a Question

Users can connect to Internet using wireless network interfaces anywhere within the range of its radio transmission. This user guide is aimed at easy installation procedures of this device. Before your installation, please read the following procedures carefully.

AboCom Systems FSW410 For example, some software sends network packets to the Internet in the background, even when you are not using the Internet. So please turn off your computer when you are not using it. This function also may not work with some ISP. So please make sure this function can work properly when you use this function in the first AboCom Systems FSW410, especially your ISP charge you by time used. Below is an explanation of each LED and what each stands for.

The LED will be off for a few seconds when AboCom Systems FSW410 system is starting. Installing and Using Wireless Router This Chapter provides a step-by-step guide to the installation and configuration of the Wireless Router. We suggest you go over the whole chapter before doing more advanced operation.

ABOCOM SYSTEMS, INC. Taiwantrade

Connect the phone line from the wall socket to the line-in port on the ADSL modem, or the coaxial cable to the line-in port on the Cable modem. Plug in the power adapter to the modem and turn on the power.

Install AboCom Systems FSW410 Ethernet card into the computer by referring to the User Guide that came with the card. Plug in the power adapter to the Router and the other side to the wall outlet.

The router supports DHCP server, which is enabled as default. The default network setting of the device: IP address: Procedures to configure IP addresses for your computer 1.

AboCom Systems FSW410 Windows Vista 64-BIT

Please click the OK button after your configuration. Management Wireless Router 3.

AboCom Systems FSW410 Windows 7 64-BIT

Please follow the steps listed below. Type The Username and Password Required window appears. You may click on each folder on left column of each page AboCom Systems FSW410 get access to each configuration page. The following instruction does an overall introduction to the Setup Wizard. For detail information to each item, please refer to instruction of each page. Mark the check box to enable synchronizing time by NTP server.

Select a WAN access type for the router to connect to Internet.

Other Drivers