ASRock IMB-170-V Driver
View and Download ASRock IMB user manual online. IMB Motherboard pdf manual download. Also for: Imbv. See it · ASRock IMBN Intel Celeron N Dual LAN industrial Mini-ITX Server Board See it · ASRock Mini ITX DDR4 Motherboards FATAL1TY Z Gaming-ITX/AC ASRock Intel Avoton C GHz/DDR3/SATA3/V. IMB (ASRock, Board Mini-ITX, Intel QM77, Socket G2 (rPGAB), 2 x DDR3 . 1 x Intel lm, 1 x Intel V for further information: WWW.
|Supported systems:||Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10|
|Price:||Free* [*Free Registration Required]|
ASRock IMB-170-V Driver
Dual Channel Memory technology is disabled ASRock IMB-170-V only one memory module is installed. To install a memory module: Locate the DIMM slots on the motherboard.
ASRock IMB motherboard for PC Gaming by ASRock
Press ASRock IMB-170-V slot s retaining clips outward to unlock. Align the memory module on the socket, making sure that the module notch matches the slot rail. Insert the module firmly into the slot until the retaining clips snap back inwards and the module is securely seated. Getting Started ASRock IMB-170-V 22 2. Check the card's documentation and perform requisite system configurations before installation.
Remove the system unit cover if the motherboard is installed in a chassis. Remove the bracket facing the destination slot.
Buy Bios-Chips, ASROCK IMBV, from €, new, incl. Programming
Align the card connector with the slot and press firmly until the card is ASRock IMB-170-V seated. Fix ASRock IMB-170-V card to the chassis with screws. Replace the system cover. CMOS is powered by an onboard button cell battery.
Power down and disconnect power from the system. Short pins on JP1.
Reconnect power and power up the system. After power up, remove the jumper cap from pins and reinstall it to pins Do not place jumper covers ASRock IMB-170-V headers and connectors to ASRock IMB-170-V permanent damage. For location on board, see Section 1. Note positive and negative pins positions before connecting the cables.
Connect to the reset switch ASRock IMB-170-V the chassis front panel. Connect to the power status indicator on the chassis front panel. Connect to the hard drive activity LED on the chassis front panel. The LED is lit when the hard drive is reading or writing data.
Table Front Panel Connections While front panel design and layout may differ by chassis, the panel conventionally has at least a power switch, reset switch, power LED, hard drive activity LED, and speaker. When connecting, ensure cable and pin assignments are matched correctly. You may also restart by turning the system off and then back on.
Because the UEFI software is frequently updated, the setup screens and ASRock IMB-170-V provided are for reference only, and may not conform exactly with those displayed. Just launch this tool and save the new UEFI file to your USB flash drive, floppy disk or hard drive, then you can update your UEFI ASRock IMB-170-V in a few clicks ASRock IMB-170-V preparing an additional floppy diskette or other complicated flash utility.
IMB-170 motherboards Mini-ITX motherboard Socket G2 Architecture
Intel ASRock IMB-170-V Technology Intel s power saving technology, under which processors can switch between multiple frequencies and voltage points ASRock IMB-170-V conseve power saving, with default value Enabled. Intel Turbo Boost Technology Enables or disables Intel Turbo Boost Mode, which allows processor cores to run faster than marked frequency in specific conditions, with default Enabled.
Adjacent Cache Line Prefetch Turns prefetching of ASRock IMB-170-V cache lines on and off. Share Memory Configure the size of memory allocated to the integrated graphics processor ASRock IMB-170-V the system boots. IGPU Multi-Monitor Disable deactivates integrated graphics when an external graphics card is installed, Enable maintains integrated graphics function at all times.
Hard Disk S. Self-Monitoring, Analysis, and Reporting Technology feature.
Intel USB 3. Clear Status Appears only when a case opening has been detected.