Drivers Update: ASRock H61M-VG3 Intel Chipset

Download Now
ASRock H61M-VG3 Intel Chipset Driver

ASRock H61M-VG3 Motherboards - showing product details. Reviews · Price history. Form factor. microATX. Chipset. Intel H Type of memory. DDR3. Results 1 - 25 of 77 - ASRock H61M-VG3 Motherboard Socket Intel H61 DDR3 Micro ATX FAST SHIPPING. Gaming PC take a little bit longer usually is. helping my friend set up his new PC. only hardware installed is the following: i 8GB ram asrock h61m-ge motherboard crucial m4 ssd.

ASRock H61M-VG3 Intel Chipset Drivers Windows 7

Type: Driver
264 (4.05)
Downloads: 954
File Size: 28.69Mb
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP, Other
Price: Free* [*Free Registration Required]

Download Now
ASRock H61M-VG3 Intel Chipset Driver

Motherboard ASRock H61M-VG3 Drivers, utilities and instructions t

Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches.

Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys.

ASRock H61M-VG3, Socket:Intel® 1155, Chipset: Intel® H61, DDR3, 1600 MHz

Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load ASRock H61M-VG3 Intel Chipset, engage the load lever. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation.

Ensure that the CPU and the heatsink are securely fastened and in good contact with each other. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink.

ASRock H61M-VG3 Intel Chipset Drivers for Mac

Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto center of IHS on the socket surface.

Apply Thermal Interface Material Step 2. Place the heatsink onto the socket. Step 3. Align fasteners with the motherboard throughholes.

Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners. Fan cables on side closest to MB header Fastener slots pointing straight out Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Step 5. Connect fan header with the CPU fan connector ASRock H61M-VG3 Intel Chipset the motherboard.

  • Motherboard ASRock H61M-VG3 Drivers, utilities and instructions t
  • Warranty & Support
  • Questions & Answers
  • Drivers and utilities for motherboards ASRock:

Step 6. Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components.

ASRock H61M-VG3 Intel Chipset Driver Windows

Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward.

The DIMM only fits in one correct orientation. PCIE slots: Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before ASRock H61M-VG3 Intel Chipset start the installation. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use.

Keep the screws for later use.

Other Drivers